How to Solve Common Garage Door Issues

Up, down, up, down, up, down – that is how a garage door operates every day, over and over, until something is amiss and they can’t function properly. Fortunately, you can take some preventive measures to avoid garage door problems that cost a fortune.

Some preventive measures include checking the door regularly, testing the door balance, inspecting the rollers, checking the cables, and using the auto-reverse function. There are other measures that are included in your owner’s manual that you should take seriously to prevent serious problems.

Garage door maintenance shouldn’t be taken lightly and should be a part of your yearly routine. Experts recommend that you have to maintain your garage door twice every year. Don’t miss any of the schedules so you won’t regret it.

What are common garage door issues and how to deal with it?

Garage door rollers

Rollers are the most-used part of a garage door because they are used to move up and move down the track system. Since you’re using it for a thousand times, it’s expected that it will be worn out. You need to check it regularly, listen to it to check if it’s still in good condition. According to Doormatic Garage Doors, to prevent roller breakage you need to replace rollers every five years.

To avoid inconvenience you can schedule and mark your calendar when to replace your rollers. It will save you the hassle in the future and prevent garage door issues.

Garage door opening and closing

If you are using your garage door as the main door frequently, it’s possible to accidentally cause the safety sensors to move. If you notice that your garage door is malfunctioning – not closing thoroughly or opening, check the safety sensors, and adjust it correctly.  

Here are some reasons why it’s malfunctioning:

1. The garage door has track problems. Problems arise when its tracks are misshapen or obstructed by debris and dirt, because rollers should slide off smoothly on the tracks. This is also the main reason why you should regularly check the tracks.

2. The cables have snapped. Sometimes when a garage door is exposed to intense weather it causes the parts to rust and later on break down. Cable snapping is very dangerous to the people around and appliances that are in your garage. If this happens you should immediately call for professional help.

3. Your door isn’t lubricated properly. Check if your garage door is making an unusual noise or so stiff because if so, the components might not be lubricated properly. If this is the case, you can buy a lubricator and apply as per your manual.

The garage door hinge

Experts stress that garage door hinges shouldn’t be neglected because lubricating the hinges is a good way to keep them from breaking due to regular use. It can also help you prevent serious damages to your garage door.

Door cracks or gaps

These cracks or gap in a garage door is unappealing. It can be the cause of water to come inside your house when it is raining. It also causes some debris from outside to go to your garage and may cause your equipment to break. These gaps should be immediately replaced to secure your garage.

If you don’t have time to replace it, you can also use some overhead racks in your garage to secure your things. There are a lot of durable racks in FlexiMounts that you can choose and can fit your garage. You can easily assemble and mount these racks and start organizing your garage.

Garage Door that doesn’t respond to remote or keypad

There are different reasons why your garage door isn’t responding to your remote or keypad:

1. You might be out of range of the antenna. You have to move closer to the door when using the remote or the keypad because modern garage door openers can operate in only a small radius. Your distance might be affecting it.

2. Your remote and keypad are battery operated. Like the garage door itself, you should also check the battery of your remote and keypad regularly. You have to know that it won’t operate without it.

3. Reprogram your remote control or keypad. There are some sensitive electronics inside a remote control and keypad that may lose its programming and needs to be reset. But you need to be very careful when checking because it may break and can make your remote or keypad to malfunction entirely.

Garage door automatically reverses before even hitting the floor

There are two possible reasons why your garage door is reversing before it touches the floor. One is the close-force setting needs adjustment. According to The Spruce, a closing force is “the pressure with which a door is allowed to descend before the motor switches off.” Its friction tricks the door opener into thinking that the door already reached the floor. When this happens you need to adjust the sensitivity of the closing force.

The second reason is there might be damage on the tracks or some debris that also tricks the door. To avoid this happening, regularly check the tracks of your garage door.

Winter problems with the garage door

Sometimes winter can affect the effectiveness of the garage door. Sometimes it fails to open because of the cold. If this happens look for a screw on the motor and adjust the sensitivity of the opener. You can also check if the rollers are stiff because of the cold, then you can apply a lubricant on it.

Moisture and cold can also conspire to make your life difficult in opening your garage door during winter. It can make your garage floor icy that can lead to the door opener to fail, but it should be broken when you hit the opener button. What if it didn’t even budge to open? This may be a cause of some serious situation you have in your garage door. There may be stripped gears, broken springs, and a burned-out motor on the opener. Check the operator’s manual when these winter problems arise so you won’t be misguided.

These are just some preventive measures for your garage door maintenance. You should always be proactive when dealing with it to prevent other issues that may compromise your family’s security and comfortable life.

In conjunction with maintaining your garage door is increasing its security. Did you know that anyone with a clothes hanger can pull the emergency release lever down and break in your garage completely?

What you should do to strengthen your garage door security?

1. Completely disable the emergency release lever. This is the best way to prevent the clothes hanger trick from entering your home without permission, but it also means that you won’t be able to enter with this trick also.

2. Remove the cord attached to the lever. There is this cord for you to easily access the lever and you should remove it because it can also be accessed from outside. The clothes hanger trick can also be applied here.

3. Cover your garage door windows. Using frosted windows can also do the trick in fooling those thieves. Or if you want, you can entirely cover it so other people can’t peek into it and do the clothes hanger trick. Remember that when you see the inside, you’ll have an idea of how to break into it.

4. Go “old school” and forget the automatic garage opener. This may be a little hassle but it is the most effective hack for your garage door security. You can disconnect the garage door opener and use a manual latch to lock the door. It is just like the old days that everyone who does not have the key can’t go in.

5. Use motion sensor lights. Motion sensor lights can reduce the chance that burglars would break into your house at night because not all of them can work with the light on.

6. Double secure the entry door to your house. Not because you have a security system in your garage door that you won’t even put locks in the entry door of your house. That is the common mistake that most people do so once the burglars are in the garage they can easily go inside the house.

7. When you’re out of town, turn off the power. Without power, your garage door opener won’t work.

Do not forget your garage door maintenance and also security so you can have a safe and sound sleep at home. Check out fleximounts.com for more specialized stories.

Leave a comment

You must be logged in to post a comment.